Xbench 3.0 crack serial key#

Proficy Machine Edition Serial Key proficy machine edition 9.0, 6672 records found, first 100 of them are: I'm unsure if it's something I'm needing to set up within Proficy Machine Edition, or if it's due to the serial cables/adapters, Comm Port setup on laptop, or something else that I've not thought of.Īny help is appreciated. I have also tried disabling then enabling Comm Port 1, and also allocating to different Comm Port to see if this has any effect, but no change. The CPU knows that there is a connection trying to be established, as the Port 1 or Port 2 LED's will illuminate on each try of connection, but extinguish after a small period until next retry of connection.

I have tried setting Port 1 and Port 2 on the CPU hardware configuration to different baud rates, parity, stop bits etc, but still having issues connecting. I have made hardware configuration within PME with the CPU as P/No IC200CPU001, validate target, and when I try to go online to target the connection times out after multiple retries. I'm unsure if the connection settings were changed on the original configuration. The problem I have is I don't have the original configuration code so I'm trying to lift the running code from PLC for a back-up. The PLC CPU has only 2 communications ports, 9-pin RS232, and 15-pin RS485. I can only use Comm Port 1 on my laptop, as I only have access to 9-pin serial cables as I am currently offshore at the moment.

I'm using Proficy Machine Edition 8.0 which is fully licensed.

I'm trying to connect to a GE Fanuc Versamx PLC, P/No IC200CPU001, using either straight through 9-pin serial RS232 cable to port 1, or 9-pin serial cable to SNP Adapter (P/No HE693SNP232R) to port 2.